CCC Forum

Here is another effort to post from PBase

[img]http://www.pbase.com/ninaludwig/image/164426622/large.jpg[/img]
[img]http://www.pbase.com/ninaludwig/image/164426622/medium.jpg[/img]

[img]http://www.pbase.com/ninaludwig/image/164426622/small.jpg[/img]

It was not possible to determine the dimensions of the image. Please verify that the URL you entered is correct.
It was not possible to determine the dimensions of the image. Please verify that the URL you entered is correct.
It was not possible to determine the dimensions of the image. Please verify that the URL you entered is correct.

Peter Where am I going wrong?

I had to disable BBCode eventually as it refused to post anything.

I do not wish to reduce the pixel size of my images. Is that the problem and if so can't we address this issue on the forum.

I've been requesting that for quite some time and the consensus opinion seems to be against change

Peter Where am I going wrong?

You were doing nothing wrong - the server configuration had been changed for some reason.

(This was causing a different error behind the scenes - the one you saw was a red herring.)

I have just corrected it so go ahead and use any of the img tags from your original post and they should work now.

Ok here goes

Tried again with exactly the same result as before.

Looking at the Pbase FAQs, there appears to be an account setting you have to enable to allow direct linking. Have you checked that?

http://www.pbase.com/help/direct_linkin ... ch=linking

Sorry Nina, it's a similar issue as before with the server configuration, but the setting is supposed to be On already, so I will need to check with the hosting company to get it sorted.

In the meantime, I think I've bypassed the check... trying with an image below... if this works, cross your fingers and try again.